How Wide Are Artificial Turf Rolls in Australia?

The short answer

Artificial turf made in Australia comes off the roll at 3.71 metres wide. That is the width our entire range ships at, and it is the number worth planning your yard around before you order anything.

Imported product is less predictable. Rolls at 2m, 2.5m, 3m, 4m and 5m all turn up in the Australian market, so width is a spec you check on each product page rather than a constant you can assume. Two turf products at the same price per square metre can cost you noticeably different amounts once the roll width meets the shape of your yard.

Length is the part you choose. Turf ships in fixed cut lengths, commonly 5m, 10m, 15m or a full 20m roll depending on the product, and a length shorter than a full roll carries a cutting fee. The width stays exactly where the factory set it.

Why the width is fixed in the first place

Synthetic grass is tufted on a loom. The loom stitches yarn into a backing cloth that runs the full working width of the machine, and the backing is then coated and bonded across that entire sheet in one pass. What comes off the end of the line is a finished roll of a single width, wound and wrapped.

Nothing downstream can change that. A supplier can slice a roll down its length, but then they are holding a leftover strip whose width suits nobody else's yard, and somebody has to wear the cost of it. The trade avoids the problem by selling full width and cutting across the roll instead, which is why you order a set length rather than an exact area.

Why the Australian standard settled on 3.71m rather than a round 3.5m or 4m is one of those industry conventions that nobody in the supply chain can explain properly. It has been consistent long enough that Australian landscapers plan around it by habit, which is the practical bit.

Widths you will come across in Australia

Roll width	Typically found on	Best suited to
2m	Imported ranges, often sold as short cut lengths	Balconies, narrow side paths, courtyards
2.5m to 3m	Imported ranges	Small courtyards, patios, dog runs
3.71m	Australian-made product, including our whole range	Most suburban backyards
4m	Imported ranges	Yards between 3.8m and 4m wide
5m	Larger-format imported and sports-grade product	Big open areas, sports and commercial jobs

Treat that as a map of the market rather than a ranking. A wider roll is only an advantage when your specific dimensions happen to suit it, which is a smaller share of yards than the marketing suggests.

What the width does to your order

Areas 3.71m wide or narrower

Everything under 3.71m across is covered by one piece with no join anywhere in it. That is the easiest install available and the most forgiving of a slightly imperfect base, since a seam is the part of a DIY job most likely to show later.

This covers more areas than people expect. Balconies almost always fit inside a single width, which is one of the quiet advantages of turf over decking tiles on a small space, and our balcony and rooftop turf page goes through the rest of what changes up there. A standard side path, a bin corner, a strip beside a driveway and most courtyard lawns all sit under 3.71m too.

The trade-off on a narrow area is waste. Order a 10m length for a 1.5m wide path and you have paid for 37.1m² of turf to cover 15m². The width does not shrink to suit you. If you have a second small area anywhere on the property, do both in the same order and the numbers improve sharply.

Areas wider than 3.71m

This is the normal case for an Australian backyard, not a complication. You run two or more drops side by side and join them underneath with joining tape and outdoor adhesive.

Area width	Drops needed at 3.71m	Seams
Up to 3.7m	1	None
3.8m to 7.4m	2	1
7.5m to 11.1m	3	2
11.2m to 14.8m	4	3

Two rules matter more than the rest. Every drop has to run the same pile direction, because the blades lean one way and a flipped piece reads as a different shade of green from the back door in the afternoon sun. And the seam wants to land somewhere sensible, away from your main sightline and away from a trampoline leg, a gate swing or the line everyone walks. Our guide to laying artificial turf covers the joining method step by step.

Is a 4m roll better than a 3.71m roll?

Only for a narrow band of yard widths, and it costs you elsewhere.

Take a lawn 3.9m wide. On a 4m roll it is a single piece with 100mm trimmed off, no seam at all. On a 3.71m roll you need two drops, so you have a seam and a fair bit of offcut. In that one case the wider roll wins clearly.

Now take a lawn 7m wide. On 3.71m rolls, two drops give 7.42m of coverage and 420mm gets trimmed away. On 4m rolls, two drops give 8m and a full metre gets trimmed away. Same number of seams, more waste, and you are paying per square metre for turf that ends up in the bin. Push the yard to 7.5m and the 3.71m roll needs a third drop while the 4m roll still manages with two, and the advantage flips back the other way.

The honest version is that no width is universally better. Measure first, then check the width of anything you are comparing. A cheaper product on a width that fights your dimensions can land dearer than a better one that fits.

Price comparisons need the same care. General Australian market rates run roughly $15-30/m² for budget 15-25mm turf supply only, $30-45/m² mid-range and $40-60/m² premium, all inclusive of GST, but those figures describe the turf you receive rather than the turf you use. Two extra square metres of unavoidable offcut on a mid-range product is $60-90 that never touches the ground. For our own range, each product page carries an instant length-and-quantity calculator, so the fastest way to see what a real order comes to is to put your dimensions into the page for the tier you are considering and read the current pricing there.

Working out your own numbers

Sketch the area, measure the longest and widest points, then test both orientations before you settle on anything. Turf only runs one way along a roll, so the direction you choose to run the drops changes how many metres you buy. Our yard measuring guide walks through rectangles, L-shapes, curves and the waste allowance to add on top.

Once you know your dimensions, pick the tier that suits the job and the length that covers it. The full range sits on one page with pile heights and specs side by side, or go straight to a product like Comfort Plus 30 or Classic 40 GT and use the calculator there. One delivery note worth knowing before you plan too far ahead: we do not ship to Western Australia or South Australia.

Frequently asked questions

Is 3.71m the roll width for every artificial turf sold in Australia?

No. It is the standard width for Australian-made turf, and it is the width every product in our range ships at. Imported ranges are commonly made at 2m, 2.5m, 3m, 4m or 5m, so check the spec sheet on anything you are comparing rather than assuming. Roll width is usually listed alongside pile height and backing type on a decent product page.

Can I order a roll narrower than 3.71 metres?

No. The width is set by the loom the turf was made on and cannot be changed after manufacture. You choose the length instead, commonly 5m, 10m, 15m or a full 20m roll depending on the product, with a cutting fee applying to anything shorter than a full roll. Trimming the width down to suit a narrow path is done on site with a sharp knife once the turf arrives.

How wide a yard can I cover without a seam?

Anything up to 3.71m across, less a small allowance for trimming, so treat about 3.7m as your practical limit for a single piece. Beyond that you need two or more drops joined side by side, which is the normal situation for most Australian backyards. Plan where the seam falls before you order rather than discovering it on install day.

Does roll width change the price per square metre?

Not directly. Price per square metre is set by the product's specification, mainly pile height, yarn type, backing and warranty, rather than how wide the roll is. Width affects your total cost through waste, because a roll that suits your dimensions leaves less offcut you have paid for and never use. Compare the total for your actual area rather than the headline rate.